filter insert

 
C.C.JENSEN offers various kinds of CJC® Filter Inserts type B removing all four contamination types in one and the same process: particles, water, varnish, and acidity: 

1. Type B:

CJC® B Filter Inserts, designed for hydraulic and lubricating oils. 
Our base solution that strike the best balance between fine filtration efficiency and high dirt holding capacity, resulting in lowest cost for removing one kilo of contamination from oil.

Used for maintenance of below oil types:

  • Hydraulic oils
  • Gear oils
  • Bearing lubricating oils
  • Turbine mineral oils
  • Synthetic oils

2. Type BG:

CJC® BG Filter Inserts, designed for fine filtration of high viscosity gear oil in a relatively compact depth filter with good dirt holding capacity. For decades, the BG Filter Inserts have proven valuable in real-life applications on wind turbine gear boxes.

Used for maintenance of below high viscosity oil types:

  • Gear oils
  • Bearing lubricating oils
  • Mineral & synthetic oils

3. Type BK:

CJC® BK Filter Inserts, designed for filtration and removal of humidity from oils.
Based on CJC® B Filter Insert, but extra dried and vacuum packed, so the cellulose filter media contains no humidity. Designed for systems, where below 50 ppm of humidity is required.

Used for maintenance of below oil types:

  • Transformers
  • Tap Changers
  • Hydraulic systems
  • Gears
  • Bearing lubricating oils

4. Type BLA:

CJC® BLA Filter Inserts, designed for filtration of water containing oils and fluids. The BLA Filter Inserts will allow water to pass through, but will retain particles and varnish.

Used for maintenance of below oil types:

  • EALs, Morg Oils, paper machine lube oils
  • Water glycol-based fluid (PEG)
  • Water based fire resistant fluid (HFA, HFB)
  • Water based machine tooling fluid

5. Type BLAT:

CJC® BLAT Filter Inserts, designed for filtration and separation of water from turbine oils. 
Continuous separation of water from lubricants with good demulsibility and a density lower than that of water.

Used for maintenance of below oil types:

  • Turbine oils
  • Hydraulic oils
  • Gear and lubricating oils up to ISO VG150
  • Diesel and gas oil

6. Type BLDA:

CJC® BLDA Filter Inserts, designed for filtration of water glycols.
Based on the BLA Filter Insert, but manufactured using demineralised water to eliminate the risk of the cellulose filter media containing any residues of limescale. 

Used for maintenance of below oil types:

  • Water glycol-based fluid (PEG)
  • Water based fire resistant fluid (HFA, HFB)

7. Type BM:

CJC® BM Filter Insert, designed for filtration of gear oils on cement mills.
Based on the technology of the B FIlter Inserts, but optimised for gear oil used on mills in the cement industry.

Used for maintenance of below oil types:

  • Gear oils, cement mills

8. Type BNK:

CJC® BNK Filter Insert, designed for filtration of of insulating oil.
Based on the technology of the B FIlter Inserts, but are extra dried and vacuum packed, ensuring there is no humidity in the cellulose media. Additionally, the BNK is fitted with a 30 micron strainer in the centre hole for added safety.

Used for maintenance of below  oil types and applications:

  • Tap changer insulating oils
  • Refrigerator compressor lubrication oils

 
_______________

How do you ensure clean & dry oil
Remember to change CJC® Filter Inserts according to pressure gauge or at least once a year in order to ensure clean & dry oil! Click here to learn how to replace a filter insert.

Related Info

100 % natural cellulose fibers