oil filtration - power



Removing dissolved soft contaminants from oil - with CJC Varnish Removal Unit, VRU

Oil degradation products, oxidation and varnish are known to cause problems in many industries but especially within power generation. Oil contamination very often causes costly turbine trip-outs, revenue loss, and potential penalties for not producing electricity or steam.

Article by: Steffen D. Nyman, Corporate Trainer, C.C.JENSEN A/S, Denmark

Reduce Contamination with EHC Conditioning Units

As the need for power increases, along with the demand for stability in the electric grid, turbine manufacturers have been forced to optimize electro-hydraulic control (EHC) systems, which govern the steam supply in steam turbines and the air supply in gas turbines. Because the reliability of the EHC system is vital for the operation of the turbine, avoiding failures with proper maintenance is absolutely essential. Therefore, it makes sense to use very fine filtration for maintaining the EHC fluid. In this paper, learn how an EHC conditioning unit can keep the four types of contamination in check for many years if sized and maintained correctly.
Article by: Steffen D. Nyman, C.C.JENSEN Inc., USA

NAES, New Harquahala Generating

“User Group Gets an Assist on Fan Gearbox Lube Oil Solution...” Combined Cycle Journal 
by Axel Wegner, C.C.JENSEN Inc. USA

Corp's experience with operating hydro turbines and case study

Hydro Review
by John S. Micetic, U.S. Army Corps of Engineers
and Mr. Justin Stover, C.C.JENSEN Inc., USA